4 Inch Trench Drain Channel 39.4 In Sections with Galvanized Steel Grating, Set of 5

Five sections of 4-inch trench drain channel give you the flexibility to configure the run length the installation requires — use all five for a 197-inch continuous run, or use fewer sections for a shorter application and keep the remainder for a second location. The galvanized stamped steel grating handles vehicle load and outdoor conditions without the corrosion that bare steel develops within a season.

The 4-inch channel profile is the standard residential specification — sufficient internal volume for the flow rates encountered in driveway and garden drainage without the overengineering of a larger commercial channel.

• Set of 5 sections, 39.4 in each — total run of 197 in when connected end-to-end; configure shorter runs and keep remaining sections for a second location.
• Galvanized stamped steel grating — handles vehicle load and outdoor conditions; the zinc layer prevents the rust that bare steel develops within a season of outdoor use.
• 4-inch channel profile — the standard residential specification; sufficient internal volume for driveway and garden drainage flow rates.
• Interlocking sections — connect end-to-end for a continuous run without gaps or joints between sections.
• Driveway and garden application — suitable for residential driveways, garden paths, patios, and any outdoor surface where surface water accumulates.

Five sections, one installation. The trench drain kit that gives you the run length you need without cutting or custom ordering.